Spoiler, Removing And Installing, From Product Improvement: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bumper cover lower section. Refer to BUMPER COVER LOWER SECTION, REMOVING AND INSTALLING, FROM PRODUCT IMPROVEMENT .
-- SQ7: remove the end panel. Refer to END PANEL, REMOVING AND INSTALLING .
-- Remove the bolts -arrows-.
-- If equipped, disconnect the connectors -4- on the power rear lid opening control module -6- and free up the wire -5- on the spoiler -1-.
-- Release the retainers -arrows-.
-- Disconnect the connectors -2- for the parking aid sensor -3-.
-- Remove the spoiler -1-.