Air Supply Unit With Bracket, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Vent the system. Refer to AIR SUSPENSION SYSTEM, FILLING AND BLEEDING .
-- Switch off the ignition.
-- Remove the nuts -arrows-, and remove the cover -1- for the air supply unit.
-- Disconnect the connector -3- from the solenoid valve -1-.
-- Remove the air lines -arrows- and protect them from dirt.
-- Disconnect the connectors -1, 2 and 3-.
-- Free up the wiring harness.
-- Loosen the clamp -1- and remove the intake air guide from the air filter -2- and free it up.
-- Remove the bolts -arrow- and nut -3- and remove the bracket with the air supply unit.