Lower Tail Lamp, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn the light switch to position "0".
-- To protect the paint in the area around the cap, tape it off with a soft cloth.
-- Push the upper cap -2- on the outside inward in direction of -arrow-.
-- Remove the cap and let it hang.
-- Remove the bolt -1-.
-- Pivot the tail lamp -1- on the inside of the bumper cover -2- slightly outward in direction of -arrow A- and remove from the outside from the bumper cover in direction of -arrow B-.
-- Disconnect the connector.