Lower Tail Lamp, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI
|
Install in the reverse order of removal while noting the following:
-- First insert the tail lamp -2- on the outside in the bumper cover -3-. The guide -1- must engage in the mount -arrow- while doing so.
-- Tighten the bolt.
-- Push the cap -4- until it engages audibly in the bumper cover.