Alcohol Interlock System, Initial Operation
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Connect the alcohol interlock system
-- Pay attention to the manufacturers instructions when installing and connecting the control module.
-- Connect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Insert a 20 A fuse in Fuse Panel J -SJ- in location SJ9 in the luggage compartment on the left side.
Perform a software update
-- Connect the Vehicle Diagnostic Tester.
-- Select "flash".
-- Select "Enter SVM code".
-- Perform the software update with SVM code -46A510-.
Start the alcohol interlock system.
-- Perform a function test following manufacturer instructions.