Special Connector Systems

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer to SECONDARY LOCK .

Fasten Contacts

Fig 1: Guiding Release Tool Into Release Channel

Courtesy of AUDI

-- Guide the release tool which fits the connector housing into release channel on connector housing.

-- Grasp contact at wire and push it gently into connector housing.

NOTE:

By pushing the contact in the direction of the connector housing, contact retaining tabs are lifted off the housing shoulder and released using the release tool.

-- At the same time, push the release tool in the direction of the connector housing and pull the released contact out of the connector housing in the direction of -arrow-.

Fig 2: Identifying Removal Of Fasten Connector Terminal

Courtesy of AUDI

-- After removing the contact, release tool can be pulled out of the connector housing again.

GT 150/280 Contacts

Fig 3: Identifying Removal Of GT 150/280 Connector Terminal (1 Of 2)

Courtesy of AUDI

-- Guide the release tool which fits the connector housing under retaining tab into connector housing.

-- Push tool into connector housing until it stops -arrow-.

Contact is ejected from the connector housing.

Fig 4: Identifying Removal Of GT 150/280 Connector Terminal (2 Of 2)

Courtesy of AUDI

-- After ejecting the contact, release tool can be pulled out of the connector housing again.

Contacts without Retaining Tabs

Fig 5: Identifying Removal Of Connector Terminal Without Releasing Tabs (1 Of 2)

Courtesy of AUDI

-- Insert release tool under retaining tab of connector housing.

-- Push release tool through until it stops by gently lifting -arrow-.

Contact is ejected from the connector housing.

Fig 6: Identifying Removal Of Connector Terminal Without Releasing Tabs (2 Of 2)

Courtesy of AUDI