Voice Recognition System, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the Information Electronics Control Module 1 -J794-. Refer to Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING .
Perform the following function test:
-- Switch on the Radio -R-.
-- Press the PTT button on the multifunction steering wheel briefly.
A "ping" tone sounds and the voice recognition system is active.
-- Say the command "Help".
If the Radio -R- is active, the voice recognition system responds with "Radio commands are...".
Depending on the equipment, other functions can be selected:
-- If a telephone is installed, say "telephone".
The voice recognition system switches to the telephone mode.
-- Press the PTT button for 1 second.
The voice recognition system responds with "Cancel" and is deactivated.