Control Knob Cover, Replacing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
To remove the cover an adhesive strip from the replacement part kit is used.
-- First clean the cover thoroughly. Remove the protective film from the adhesive strip.
-- Push the adhesive strip -2- on the cover using thumbs.
-- After a wait time of five seconds the cover can be removed vertically upward in a jerking manner -arrow-. Make sure that when removing that the control knob on the chrome ring is counterheld.