Driver Volume Control -E67-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the center console cover. Refer to CENTER CONSOLE COVER, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -1, 2, 3-.

Fig 1: Center Console Switch Module 1 -EX23-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Release the decorative frame retainers -2- -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the switch trim -1- with the switch module -3-.

-- Release the retainers -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Driver Volume Control -E67- -1- from the front center console display cover.