Overview - B-Pillar Trim Panel
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- Quantity: 4
- Insert in the trim panel
- Remove any remaining clips in the body mounting points using the Omega Clip Tool:T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Speaker
- Removing and installing. Refer to COMPONENT LOCATION OVERVIEW - SOUND SYSTEM .
- Bracket
- Clipped in the B-pillar
- Press on it until it locks
- Removing and Installing. Refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING .
- B-Pillar Upper Trim Panel
- Insert in the upper part of the mounting points on the roof and clip into the bracket
- Press on until it engages audibly
- Stretch the door seal lip over.
- Removing and Installing. Refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Vent
- Connect electrical harness connector, first insert lower vent in the trim and press on it until it engages audibly
- Removing and Installing. Refer to B-PILLAR UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Speaker Adapter
- Clip into the speaker trim
- Speaker Trim
- Clipped in the B-pillar trim panel
- Press on until it engages audibly
- Removing and Installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
- B-Pillar Lower Trim Panel
- Clipped in the B-pillar
- Press on until it engages audibly
- Stretch the door seal lip over.
- Equipped on some models on the front passenger side: with Air Ionization System Button -E677-
- Removing and Installing. Refer to B-PILLAR LOWER TRIM PANEL, REMOVING AND INSTALLING .
- Front Sill Panel
- Engage the sill panel strip in the B-pillar trim.
- Press on until it engages audibly
- Stretch the door seal lip over.
- Removing and Installing. Refer to FRONT SILL PANEL, REMOVING AND INSTALLING .