OVERVIEW - HOUSING, 0B0 "quattro ultra"

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Final Drive Housing (0B0 "quattro ultra")

Courtesy of AUDI

Housing
- With all-wheel drive clutch
Housing
- With differential
Centering Pin
- Quantity: 2
Magnet
- Always clean
Bolt
- Tightening specification and sequence. Refer to Fig 2.

Tightening specification and sequence of housing bolts

Fig 2: Rear Final Drive Housing Tightening Sequence

Courtesy of AUDI

	Bolt	Tightening specification
1.	1 to 9	Install all the way by hand
2.	1 to 9	30 Nm
3.	1 to 9	Re-tighten to 45°