A/C Compressor Bracket, Removing And Installing, 3.0L Engine: Removing
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
-- Remove the ribbed belt tensioner for the A/C compressor. Refer to RIBBED BELT TENSIONER FOR A/C COMPRESSOR, REMOVING AND INSTALLING, 3.0L ENGINE .
-- All models except A8: remove the A/C compressor from the bracket and tie it up to the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .
-- A8: remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .
-- Remove the bolts -2 and 3- and the bracket -1- for the A/C compressor.