Overview - Balance Shaft
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 40 Nm + 45°
- Always replace after removing.
- Gear
- With the chain sprocket for the camshaft timing chain
- Bolt
- 9 Nm
- Balance Shaft
- Removing and installing. Refer to BALANCE SHAFT, REMOVING AND INSTALLING .
- Roller Bearing
- Replacing. Refer to ROLLER BEARING, REPLACING .
- Balance Weight
- Can only be placed on the balance shaft in one position
- Bolt
- 40 Nm + 90°
- Always replace after removing.
- Roller Bearing
- Replacing. Refer to ROLLER BEARING, REPLACING .
- Thrust Washer
- Seal
- Always replace after removing.
- Gear Carrier