LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Final Drive, Differential) >> 39 Final Drive, Differential >> Seals >> Transmission Output Shaft Seal, Replacing >> Removing

Transmission Output Shaft Seal, Replacing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driveshaft. Refer to the appropriate Service Information. .

-- Remove the all-wheel drive clutch. Refer to the appropriate Service Information. .

-- Pry out the output shaft seal using the Puller - Crankshaft/Power Steering Seal:T20143/2  .

GWWA34-11638Courtesy of AUDI
scientia non olet · About LEMON Manuals