Overview - All-Wheel Drive Clutch
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
All information for the all-wheel drive clutch -1- can be found in the repair information. Refer to the appropriate Service Information. .
- All Wheel Drive Clutch
- Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
- Servicing. Refer to the appropriate Service Information. .
- ATF fluid level, checking. Refer to the appropriate Service Information. .
- Bleeder
- Bolt
- Quantity: 3
- M8 X 70
- Replace after removing
- 8 Nm +180°
- Balance Weight
- Installed depending on the version
- Bolt
- Installed depending on the version
- 28 Nm
- Bolt
- Installed depending on the version
- 28 Nm
- Heat Shield
- For driveshaft
- Installed depending on the version
- Heat Shield
- For the All-Wheel Drive Control Module -J492-
- Installed depending on the version
- Bolt
- Installed depending on the version
- 8 Nm
- Bolt
- M8 X 100
- Replace after removing
- 8 Nm +180°
- O-Ring
- For the All-Wheel Drive Control Module -J492-
- Replace after removing
- O-Ring
- For the All-Wheel Drive Control Module -J492-
- Replace after removing
- All-Wheel Drive Control Module -J492-
The following are integrated in the All-Wheel Drive Control Module -J492- :
- All-Wheel Drive Clutch Actuator -V622-
- All-Wheel Drive Clutch Position Sensor -G969-
- Removing and Installing. Refer to the appropriate Service Information. .
- Bolt
- 21 Nm