All-Wheel Drive Clutch, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Check the O-ring -1- on the all-wheel drive clutch input shaft -2- for damage and if necessary replace.
-- Apply a thin layer of Sealing Grease on the splines of the all-wheel drive clutch input shaft.
-- Place the all-wheel drive clutch -1- on the transmission and tighten the bolts -arrows- hand-tight.
-- Tighten the bolts -arrows- diagonally to the tightening specification.