LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Ignition/Glow Plug System (6-Cylinder Direct Injection 3.0L 4V TFSI Engine Ea839)) >> 28 Ignition/Glow Plug System >> Ignition System >> Knock Sensor 1 -G61-, REMOVING AND INSTALLING >> Removing

Knock Sensor 1 -G61-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ5 and 2023 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the corresponding engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .

Additional procedures. Refer to KNOCK SENSOR 1 -G61- / KNOCK SENSOR 2 -G66-, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals