Turbocharger, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Loosen the screw-type clamp -1- and remove the boot -2-.
-- Disconnect the crankcase ventilation hose -arrows- by pressing the release buttons on both sides.
-- Remove the bolts -1- and the connections -2- with the crankcase ventilation hoses.
-- Remove the upper air duct pipe. Refer to UPPER AIR DUCT PIPE, REMOVING AND INSTALLING .
Refer to TURBOCHARGER, REMOVING AND INSTALLING .