Upper Air Duct Pipe, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and Note The Following:
- Replace the seals and O-ring after removal.
- Replace the bolts that were tightened with an additional turn after removing them.
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Connect the coolant line with the connector coupling. Refer to Fig 1.