Body-Side Charge Air System
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Right Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
- Adapter Grommet
- Bolt
- 8 Nm
- Air Duct Hose
- Must be free of oil and grease before installing
- Bolt
- 8 Nm
- Quantity: 2
- Spacer
- Quantity: 2
- Upper Pressure Pipe
- Pressure Hose to Throttle Valve
- Refer to OVERVIEW - CHARGE AIR SYSTEM .
- Pressure Hose
- Charge Air Pressure Sensor -G31-
- Removing and installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
- Bolt
- 2.5 Nm
- Bolt
- 8 Nm
- Rubber Grommet
- Left Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
- Rubber Grommet
- Bolt
- 8 Nm
- Rubber Grommet
- Pressure Hose
- Bolt
- 8 Nm
- Rubber Grommet
- Lower Pressure Pipe
- Removing and installing. Refer to LOWER PRESSURE PIPE, REMOVING AND INSTALLING .
- Bolt to Turbocharger Pressure Pipe
- 8 Nm
- Quantity: 3
- Pressure Pipe to Turbocharger
- Pressure Hose
- Rubber Grommet
- Pressure Hose
- Bolt
- 8 Nm
- Adapter Grommet