Lower Pressure Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Pay attention to the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS - Engine .

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Remove the upper air duct -1- by releasing the upper catches in direction of -arrows- on the left and right side with the :T10118 (shown on the removed radiator).

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation. Refer to NOISE INSULATION .

-- Remove the charge air hoses from the right -item ) BODY-SIDE CHARGE AIR SYSTEM - Pressure Hose and left -item ) BODY-SIDE CHARGE AIR SYSTEM - Pressure Hose charge air cooler on the lower pressure pipe.

-- Remove the bolts -item ) BODY-SIDE CHARGE AIR SYSTEM - Bolt and remove the lower pressure pipe.