Charge Air System, Checking For Leaks: Assembling
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Assemble in the reverse order of removal. Note The Following :
- Replace the seal and O-ring after removal.
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
Tightening Specifications