Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the left front wheel housing liner. Refer to WHEEL HOUSING LINER .
-- Release and disconnect the connector from the Charge Air Pressure Sensor -G31- -1-.
-- Remove the bolt -arrow- and remove the Charge Air Pressure Sensor -G31- from the air duct pipe.