Camshaft Position Sensor 3 -G300-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

All except Audi Q7/Q8:

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Continuation for All Vehicles:

Courtesy of AUDI

-- Disconnect the connector -1-.

-- Remove the bolt -2- and then remove the Camshaft Position Sensor 3 -G300-.