Camshaft Position Sensor -G40-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

All except Audi Q7/Q8:

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Audi Q7/Q8:

Refer to the appropriate Service Information.

Continuation for All Vehicles:

Courtesy of AUDI

-- Disconnect the connector -3-.

-- Remove the bolt -1-, and remove the Camshaft Position Sensor -G40- -item 2-. (Shown with removed intake manifold.)