Coolant Pump Toothed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi Q5 and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace bolts that were tightened with an additional turn after removing them.
Note the toothed belt sprocket installation location OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT List Item:Toothed Belt Sprocket.
Used coolant cannot be used again.

-- Install the Oil Pressure Switch, Level 3 -F447-. Refer to Oil Pressure Switch, Level 3 -F447-, REMOVING AND INSTALLING .

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Fill the cooling system. Refer to COOLANT, FILLING USING Cooling System Charge Kit:VAS 6096 [DMTA, DPAA, DPUA, DPVA, DMTC, DRYA, DUVA] .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .