LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Cooling System (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4)) (DPVA)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Change-Over Valve 3 -N634-, REMOVING AND INSTALLING >> Coolant Change-Over Valve 3 -N634-, REMOVING AND INSTALLING, AUDI Q5, RHD >> Removing

Coolant Change-Over Valve 3 -N634-, REMOVING AND INSTALLING, AUDI Q5, RHD: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the high-voltage battery heat exchanger and move it to the side. Refer to HIGH-VOLTAGE BATTERY HEAT EXCHANGER, REMOVING AND INSTALLING .

-- Remove the bolts -1-.

GWWA19-13650Courtesy of AUDI OF AMERICA, LLC

-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm:3094  .

-- Place a cloth underneath to catch leaking coolant.

-- Loosen the hose clamps -arrows- and remove the coolant hoses.

-- Remove the Coolant Change-Over Valve 3 -N634-.