Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes

WARNING: This page is about a different car, the 2024 Audi Q5 and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Valve Seal:3364

Fig 1: Identifying Puller - Valve 3364
Courtesy of AUDI OF AMERICA, LLC
Seal Installer - Valve Stem:3365 for the valve stem seal with a single sealing lip. Refer to Figure.

Fig 2: Identifying Seal Installer - Valve Stem 3365
Courtesy of AUDI OF AMERICA, LLC
Fitting Tool:T40376/1 for the valve stem seal with a double sealing lip. Refer to Figure.

Fig 3: Exhaust side: Fitting Tool
Courtesy of AUDI OF AMERICA, LLC
Valve Keeper Tool Kit:VAS 5161A with the Valve Cotter Tool Kit - Guide Plate:VAS 5161/19C

Fig 4: Valve Keeper Tool Kit VAS5161A
Courtesy of AUDI OF AMERICA, LLC
Engine and Gearbox Bracket:VAS 6095A

Fig 5: Engine And Transmission Holder
Courtesy of AUDI OF AMERICA, LLC
Cylinder Head Tensioning Device:VAS 6419

Fig 6: Cylinder Head Tensioning Device
Courtesy of AUDI OF AMERICA, LLC
Assembly Tool:T40452 , not illustrated