Flywheel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi Q5 and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- The engine/transmission removed and separated on the scissor lift table. Refer to ENGINE AND TRANSMISSION, SEPARATING .
CAUTION:
Risk of damaging the dual mass flywheel due to improper handling.
- When loosening or tightening the bolts do not damage the multi-points of the dual mass flywheel.
-- Remove the bolts -arrows- and then remove the dual mass flywheel -1-.
-- To do so, use the Wrench - 21mm:T40263 , Adapter:T40314 and 24mm socket to counterhold the vibration damper.