Vibration Damper, Removing And Installing, Version 1, Vehicle With Starter Generator: Notes

WARNING: This page is about a different car, the 2024 Audi Q5 and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Vibration Damper, Version 1. Refer to Figure.

Special tools and workshop equipment required

Counterhold:T40378

Fig 1: Counterhold T40378
Courtesy of AUDI OF AMERICA, LLC
Vibration Damper Assembly Tool:T10531

Fig 2: Assembly Tool Set T10531
Courtesy of AUDI OF AMERICA, LLC
Vibration Damper Assembly:T10531/5-/6

Fig 3: Vibration Damper Assembly
Courtesy of AUDI OF AMERICA, LLC

The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.

Fig 4: Locating Vibration Damper Bolt
Courtesy of AUDI OF AMERICA, LLC