LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wheels, Tires, Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires, Wheel Alignment >> Tire Wear >> Permitted Differences In Tread Depth >> Models With Horizontally Installed Engine

Models With Horizontally Installed Engine

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Tread depth difference on models with horizontally installed engine, such as A3, TT, Q3, A1...

Here the average difference between the front and rear axle must not be greater than 3 mm.

Average at front axle 2.0 mm

Average at rear axle 4 mm

Difference of front axle to rear axle 2 mm

Within the permissible tolerance of 3 mm

scientia non olet · About LEMON Manuals