LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wheels, Tires, Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires, Wheel Alignment >> Tire Evaluation / Tire Damage >> Flat Spots From Standing

Flat Spots From Standing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Suspension shaking and tire damage can also be caused by flat spots from standing. Refer to FLAT SPOTS FROM STANDING .

What is a Flat Spot from Standing?

Terms like flat portion, flattening, are also used as a term for flat spots from standing.

Flat spots from standing cause vibration, like an incorrectly balanced wheel. It is important to recognize a flat spot in the tread from standing as such!

Flat spots from standing cannot be corrected by balancing, and can occur again at any time under various circumstances. Flat spots from standing can be corrected without complicated special tools. Providing that the wear spot was not caused by wheel lock during hard braking.

NOTE:

Wear spots due to wheel lock are irreparable! Tires with such damage must be replaced.

Refer to FLAT SPOTS, CORRECTING