Valve, Removing And Installing, Rubber Valve
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Make sure wheel rim is clean.
-- Using the Valve Fitting Tool:VAS6459 -1-, insert a new tire valve.
-- Remove the valve insert.
-- Inflate the tire to approximately 3 to 4 bar (43.51 to 58.02 psi); the tire bead must slip audibly over the rim hump when doing this.
-- Install the valve insert.
-- Fill the tire to the specified pressure.
CAUTION:
Do not screw any aluminum valve caps onto steel valve bodies. Aluminum caps attach to the steel valve body into a inseparable connection and cannot be separated again.
-- Balance the tire.