LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wheels, Tires, Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires, Wheel Alignment >> Rim Information >> Identification

Rim Information: Identification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

There are several specifications located on the rim. The following examples shows the rim identification:

Part number 4K0-601-025-AJ, size 8, 5Jx19, ET 40

Replacement parts number: 4K0 601 025 AJ
Size of disc wheel: 8.5 J x 19 8.5 - Rim width in inches J - Shape of rim flange 19 - Rim diameter in inches
Offset (ET): 40 in mm
Indication for hump on bead seat: EH2 Extended Hump. Refer to (1).
(1) Extended Hump, raised round hump on both bead seats. These ensure that when using a tire with emergency mode properties in airless condition, the tire does not slip from the bead seat. Wheels with EH2 are only necessary if tires with emergency mode properties are mounted
NOTE:

Rims with the related part numbers must always be ordered via the appropriate Electronic Parts Information.

scientia non olet · About LEMON Manuals