LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wheels, Tires, Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires, Wheel Alignment >> Rim Information >> Hub Cap For Alloy Wheels With Open Threaded Connection, Removing And Installing >> Installing

Hub Cap For Alloy Wheels With Open Threaded Connection, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Hold the cap -1- flush against the opening in the aluminum rim from the outside.

NOTE:

Do not tilt the cap.

-- Press on the cap so that it is secure inside the opening in the aluminum rim.

-- Make sure the cap is secure inside the aluminum rim.

scientia non olet · About LEMON Manuals