Vacuum Pump, Removing And Installing, 2.0L TFSI Engine: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the high pressure pump. Refer to the appropriate Service Information. .

-- Loosen the hose clamp -1- or press the release buttons at both sides, removing vacuum hose, at the same time do not damage.

Courtesy of AUDI

-- Remove the bolts -arrows-.

-- Pull the vacuum pump out of the mount and remove.