Overview - Vacuum Pump, 2.0L TFSI Engine

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Vacuum Pump, Vehicles With 2.0L TFSI Engine

Courtesy of AUDI

Vacuum Pump
- Refer to VACUUM PUMP, REMOVING AND INSTALLING, 2.0L TFSI ENGINE
Seal
- Replace after removing
Vacuum Hose
- There are different versions. Refer to the appropriate Electronic Parts Information for the allocation.
Bolt
- 8 Nm +180°
- Replace after removing
Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
Bolt
- 9 Nm
Bolt
- 9 Nm
Bolt
- Tightening specification. Refer to the appropriate Service Information. .
High Pressure Pump
- Removing and Installing. Refer to the appropriate Service Information. .
O-Ring
- Replace after removing