LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Brake System - Hydraulic Components) >> 47 Hydraulic Components >> Vacuum System >> Check Valve, Removing And Installing >> Check Valve, Removing And Installing, With Vacuum Line In Plenum Chamber >> Installing

Check Valve, Removing And Installing, With Vacuum Line In Plenum Chamber: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

TIP:

Coating the vacuum line with water (not with oil) makes it easier to remove.

-- Install the plenum chamber bulkhead. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .

-- Install the tower brace. Refer to TOWER BRACE, REMOVING AND INSTALLING .