Brake System Pressure Reservoir -VX70-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Pre-bleed the new Brake System Pressure Reservoir -VX70- before installing. Refer to Brake System Pressure Reservoir -VX70-, PRE-BLEEDING .
-- Remove the Brake Pedal Actuator:V.A.G 1869/2 .
-- Remove all cloths from the vehicle that were previously placed down.
-- After replacing the pressure reservoir, select the "Brake system pressure reservoir, replacing" program. Refer to DIAGNOSTIC ENTRIES .
-- Follow the instructions in the Vehicle Diagnostic Tester display.
-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, BLEEDING .
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.