Knock Sensor 1 -G61-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Component location: under the intake manifold behind the Engine Temperature Control Actuator -N493-.
-- Remove the Engine Temperature Control Actuator -N493-. Refer to Engine Temperature Control Actuator -N493-, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Free up the wire -1- for the Knock Sensor 1 -G61- to do so release the catch in direction of -arrow- from the bracket -2-.
-- Remove the bolt -arrow- and then the Knock Sensor 1 -G61-.