Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- If necessary, free up the engine wiring harness -1-, remove the bolt -1- and remove the bracket -2- (example illustration).
-- Disconnect the connector -2-.
-- Remove the bolt -1- and remove the Engine Speed Sensor -G28-.