LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Ignition/Glow Plug System (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4 BZ))) >> 28 Ignition/Glow Plug System >> Ignition System >> Camshaft Position Sensor, Removing And Installing >> Camshaft Position Sensor 3 -G300-, REMOVING AND INSTALLING >> Removing

Camshaft Position Sensor 3 -G300-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
GWWA28-10160Courtesy of AUDI

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

-- Remove the bolt -2- and then remove the Camshaft Position Sensor 3 -G300-.

scientia non olet · About LEMON Manuals