Camshaft Position Sensor -G40-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the intake manifold. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Remove the bolt -1-, and remove the Camshaft Position Sensor -G40- -2-. (Shown with removed intake manifold.)