LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Cooling System (2 Of 2)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Valves, Removing And Installing >> Coolant Shut-Off Valve, Removing And Installing, 2.9L Engine >> Removing

Coolant Shut-Off Valve, Removing And Installing, 2.9L Engine: Removing

WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lower air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .

-- If necessary, remove the front coolant pipe. Refer to COOLANT PIPES, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the coolant shut-off valve -2- .

GWWA19-12528

-- Remove the vacuum hose -1- at the same time to not damage it.