Coolant Shut-Off Valve, Removing And Installing, 2.9L Engine: Installing

WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note The Following:

Replace the O-ring and seal after removing.
Check the vacuum hoses for damage before the assembly and replace if necessary.

-- Install the front coolant pipe. Refer to COOLANT PIPES, REMOVING AND INSTALLING .

-- Install the lower air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .