Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and Note The Following:

Replace the seal after removal.
Replace the bolts that were tightened with an additional turn after removing them.
Check the vacuum hoses for damage before the assembly and replace if necessary.

-- Install the coolant pipes. Refer to COOLANT PIPES, REMOVING AND INSTALLING :