Ignition Coils, Removing And Installing: Removing

Depending on the model preliminary work may be required. Refer to IGNITION COIL, REMOVING AND INSTALLING .

-- Insert the Puller:T10530  in the ignition coil opening -1-.

Fig 1: Identifying Puller T10530

Courtesy of AUDI OF AMERICA, LLC

-- Turn the knurled nut -2- clockwise -arrow- until the puller is clamped.

-- Remove the ignition coil carefully vertically -arrow- using the Puller:T10530  .

Fig 2: Identifying Puller T10530

Courtesy of AUDI OF AMERICA, LLC