Carbon Brushes, Checking, All BOSCH Generators From 2001

Procedure 

Fig 1: Carbon Brush, Checking, Bosch Generators From 2001

Courtesy of AUDI OF AMERICA, LLC

-- Remove the voltage regulator: to 2007. Refer to VOLTAGE REGULATOR, BOSCH GENERATOR FROM 2001, REMOVING AND INSTALLING , after 2007 VOLTAGE REGULATOR, REMOVING AND INSTALLING, BOSCH GENERATOR FROM 2007 .

-- Check the length -a- of the carbon brushes.

• Wear limit: -a- = 5 mm.

-- Install the voltage regulator: to 2007. Refer to VOLTAGE REGULATOR, BOSCH GENERATOR FROM 2001, REMOVING AND INSTALLING , after 2007 VOLTAGE REGULATOR, REMOVING AND INSTALLING, BOSCH GENERATOR FROM 2007 .