Battery Load Test Results

By placing the battery under a strong load during the Battery -A- load test, the battery voltage will be reduced.

• If the Battery -A- is good, the voltage drops only to the specified minimum voltage.
• If the Battery -A- is defective or weakly charged, the battery voltage will drop very quickly to below the specified minimum voltage.
• After testing, this low voltage level is maintained for a lengthy period and only increases again slowly.
• Only perform the test once. Repeating the test will not produce accurate results.
• In order to be able to test another/additional Battery -A-, the : VAS5097A  must cool down for approximately 30 minutes for the test result to be correct.