LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Charging System (Battery, Starter, Generator) & Cruise Control (2 Of 2) >> 27 Starter, Generator And Cruise Control >> Battery, Checking >> Battery Tester : VAS6161 >> Non VW Battery Test

Non VW Battery Test

NOTE:

The printed test results can differ depending on the software version.

Follow the Battery Tester: VAS 6161  Operating Instructions.

WARNING:

Do not check or charge batteries that have a visual indicator that is light yellow. Do not give a jump start.

There is a risk of explosion during testing, charging or jump starting.

These batteries must be replaced.

-- Select "Non VW Battery Test" in the menu.

-- Select "at the battery terminal" or "at the battery jump start terminal".

-- Select the type of battery: "standard", "AGM", "2*6V" or "Gel".

-- Select the "CCA", "JIS", "DIN", "SAE", "IEC" or "EN".

-- Select battery value.

-- Measure the temperature. Hold the temperature sensor approximately 5 cm above the battery terminal until the temperature is stable.

-- Start the test.

-- Print out the test report if necessary.